The WATT Puppy 6 is another highly rated model from one of the most esteemed series in the speaker World. It has evolved quite a bit from the first version with the WP6 growing slightly bigger, took on more exotic materials and design in its construction, better drivers and improved crossover. With the WP1, the frequency range was 28 Hz to 18 kHz while the WP6 is 21 Hz to 21 kHz. Nominal impedance is 4 ohm and sensitivity is 92 dB. The WATT 6 now have spikes to give it additional isolation when placed on top of the Puppy 6 and allows it to be finer tuned for the different room it may be placed in. The varying spike heights allow the WATT to be tilted at three different angles for a more precise presentation. The WP6 is clearly discernible as the better speaker over the WP1 (but by not much), so it really boils down to your budget and visual preference. Speakers have the PAWS installed.
Speakers looks nice with minor scuff marks/nicks here and there but nothing major. Some wear spots on the grille covers (around the corners) and some stains that are typical from use. We don’t have the crates so local pickup preferred or if shipping is required, they will be shipped strapped on a pallet.