These were extraordinary expensive speakers that were really reserved for the top end home theater system. They are a step up from the Bronze LCR which we just sold where the Bronze LCR was used as the center channel speaker in the same system. Each speaker is 31″ tall, 10.5″ wide and 5.5″ deep. Frequency response is 60 Hz to 20 KHz with a nominal impedance of 4 ohm. Sensitivity is 88 dB. Drivers are one 6.5″ woofer and one 1″ dome tweeter for each speaker. If these speakers were played to you behind a veil, you would have guess they were some top end speakers. There was an abundance of clarity, clean mids and tight punchy bass coming out from each speaker. They also played out very well in a home theater setup and really freed up a lot of real estate on the shop floor when we mounted them on the wall. One of the speaker is missing the wing nuts which you can get a substitute from any hardware store (mounting frame not included as the previous owner kept it to mount another pair of speakers). These speakers are rarely found in the used market because there weren’t many around to begin with. The cost of producing them was rather prohibitive due to the use of the extruded aluminum frames found on the speakers (which explained its high MSRP). So they had a brief appearance in the market and then subsequently ceased to be produced after they were all sold out. A super deal now at 90% off MSRP!
Cosmetically, the speaker looks good. Some minor scuff marks/ nicks here and there and a corner ding on one of the speaker that is not noticeable unless you are looking from the top. We don’t have the original box but will securely pack this for safe shipping. Due to their weight and size, they will be shipped in two boxes so factor in x2 on the shipping.